UltiMaker 2+ specs and build volume
The UltiMaker 2+ is a mid-size printer with a 223 × 223 × 205 mm build volume (10.2 liters), smaller than 89% of the 376 printers we track.
Its slicer profile lists profiles for 0.4 mm, 0.6 mm and 0.8 mm nozzles.
No store listing names the UltiMaker 2+ yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the UltiMaker 2+
Filament for the UltiMaker 2+
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PLA-CFCheck firstAbrasive: check your nozzle is hardened · Dry before printing
- ASA-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PA6-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PET-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
Printers a similar size to the 2+
Compare build volumes →
Tools for the 2+
All tools →UltiMaker 2+ questions
What is the build volume of the UltiMaker 2+?
223 × 223 × 205 mm (width × depth × height), about 10.2 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the UltiMaker 2+ support?
Its slicer profile includes 0.4 mm, 0.6 mm and 0.8 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the UltiMaker 2+?
UltiMaker 2 (223 × 223 × 205 mm), Flashforge AD5X (220 × 220 × 220 mm) and Flashforge Adventurer 5M (220 × 220 × 220 mm).
Did a part fit your 2+?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.
