RatRig V-Core 4 400 specs and build volume
The RatRig V-Core 4 400 is a extra-large printer with a 400 × 400 × 300 mm build volume (48.0 liters), larger than 77% of the 376 printers we track.
Its slicer profile lists profiles for 0.4 mm, 0.5 mm, 0.6 mm and 0.8 mm nozzles.
No store listing names the RatRig V-Core 4 400 yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the RatRig V-Core 4 400
Filament for the RatRig V-Core 4 400
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PLA-CFCheck firstAbrasive: check your nozzle is hardened · Dry before printing
- ASA-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PA6-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PET-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
Printers a similar size to the V-Core 4 400
Compare build volumes →
Tools for the V-Core 4 400
All tools →RatRig V-Core 4 400 questions
What is the build volume of the RatRig V-Core 4 400?
400 × 400 × 300 mm (width × depth × height), about 48.0 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the RatRig V-Core 4 400 support?
Its slicer profile includes 0.4 mm, 0.5 mm, 0.6 mm and 0.8 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the RatRig V-Core 4 400?
Creality Ender-5 Plus (350 × 350 × 400 mm), Prusa XL (360 × 360 × 360 mm) and Anycubic Kobra S1 Max (350 × 350 × 350 mm).
Did a part fit your V-Core 4 400?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.