RatRig V-Core 3 200 specs and build volume
The RatRig V-Core 3 200 is a compact printer with a 200 × 200 × 200 mm build volume (8.0 liters), smaller than 91% of the 376 printers we track.
No store listing names the RatRig V-Core 3 200 yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the RatRig V-Core 3 200
Filament for the RatRig V-Core 3 200
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PLA-CFCheck firstAbrasive: check your nozzle is hardened · Dry before printing
- ASA-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PA6-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PET-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
Printers a similar size to the V-Core 3 200
Compare build volumes →
Tools for the V-Core 3 200
All tools →RatRig V-Core 3 200 questions
What is the build volume of the RatRig V-Core 3 200?
200 × 200 × 200 mm (width × depth × height), about 8.0 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the RatRig V-Core 3 200 support?
Its slicer profile includes 0.4 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the RatRig V-Core 3 200?
LH Stinger (200 × 200 × 180 mm), FLSun Q5 (200 × 200 × 200 mm) and Kingroon KP3S PRO S1 (200 × 200 × 200 mm).
Did a part fit your V-Core 3 200?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.