Kingroon KP3S PRO V2 specs and build volume
The Kingroon KP3S PRO V2 is a mid-size printer with a 205 × 205 × 200 mm build volume (8.4 liters), smaller than 90% of the 376 printers we track.
No store listing names the Kingroon KP3S PRO V2 yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the Kingroon KP3S PRO V2
Filament for the Kingroon KP3S PRO V2
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PLA-CFCheck firstAbrasive: check your nozzle is hardened · Dry before printing
- ASA-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PA6-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PET-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
Printers a similar size to the KP3S PRO V2
Compare build volumes →
Tools for the KP3S PRO V2
All tools →Kingroon KP3S PRO V2 questions
What is the build volume of the Kingroon KP3S PRO V2?
205 × 205 × 200 mm (width × depth × height), about 8.4 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Kingroon KP3S PRO V2 support?
Its slicer profile includes 0.4 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Kingroon KP3S PRO V2?
LH Stinger (200 × 200 × 180 mm), UltiMaker 2 (223 × 223 × 205 mm) and Volumic VS20MK2 (200 × 200 × 220 mm).
Did a part fit your KP3S PRO V2?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.