FLSun Super Racer (SR) specs and build volume
The FLSun Super Racer (SR) is a mid-size printer with a 270 × 270 × 330 mm build volume (24.1 liters), larger than 52% of the 376 printers we track.
No store listing names the FLSun Super Racer (SR) yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the FLSun Super Racer (SR)
Filament for the FLSun Super Racer (SR)
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PLA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- ASA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PA6-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PET-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
Printers a similar size to the Super Racer (SR)
Compare build volumes →
Tools for the Super Racer (SR)
All tools →FLSun Super Racer (SR) questions
What is the build volume of the FLSun Super Racer (SR)?
270 × 270 × 330 mm (width × depth × height), about 24.1 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the FLSun Super Racer (SR) support?
Its slicer profile includes 0.4 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the FLSun Super Racer (SR)?
UltiMaker S5 (330 × 240 × 300 mm), Creality Ender-6 (250 × 250 × 400 mm) and Qidi X-CF Pro (300 × 250 × 300 mm).
Did a part fit your Super Racer (SR)?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.