Cubicon xCeler-Plus specs and build volume
The Cubicon xCeler-Plus is a large printer with a 310 × 310 × 310 mm build volume (29.8 liters), larger than 59% of the 376 printers we track.
No store listing names the Cubicon xCeler-Plus yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the Cubicon xCeler-Plus
Filament for the Cubicon xCeler-Plus
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PLA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- ASA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PA6-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PET-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
Printers a similar size to the xCeler-Plus
Compare build volumes →
Tools for the xCeler-Plus
All tools →Cubicon xCeler-Plus questions
What is the build volume of the Cubicon xCeler-Plus?
310 × 310 × 310 mm (width × depth × height), about 29.8 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Cubicon xCeler-Plus support?
Its slicer profile includes 0.4 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Cubicon xCeler-Plus?
Prusa CORE One L (300 × 300 × 331 mm), Creality Ender-3 V3 Plus (300 × 300 × 330 mm) and Sovol SV06 Plus (300 × 300 × 340 mm).
Did a part fit your xCeler-Plus?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.