Anycubic Predator specs and build volume
The Anycubic Predator is a extra-large printer with a 370 × 370 × 455 mm build volume (62.3 liters), larger than 82% of the 376 printers we track.
No store listing names the Anycubic Predator yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the Anycubic Predator
Filament for the Anycubic Predator
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PLA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- ASA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PA6-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PET-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
Printers a similar size to the Predator
Compare build volumes →
Tools for the Predator
All tools →Anycubic Predator questions
What is the build volume of the Anycubic Predator?
370 × 370 × 455 mm (width × depth × height), about 62.3 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Anycubic Predator support?
Its slicer profile includes 0.4 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Anycubic Predator?
Creality CR-6 Max (390 × 390 × 400 mm), Eryone Thinker X400 (400 × 400 × 400 mm) and Volumic EXO42 IDRE (372 × 420 × 400 mm).
Did a part fit your Predator?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.
