Parts & upgrades that fit the The Positron
The The Positron is a compact printer with a 180 × 180 × 165 mm build volume (5.3 liters), smaller than 95% of the 376 printers we track.
Its slicer profile lists profiles for 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles.
We found 1 parts listed as compatible with it, led by 1 spare parts, from 1 store: West3D.
Where to buy the The Positron
Spare parts for the The Positron
Silicone Sock for Positron 90 Degree Hot End
Listed as compatibleSpare partsLDOsold by West3D“This is specifically designed for the Positron V3.2 90 Degree Hot End .”
Filament for the The Positron
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PLA-CFCheck firstAbrasive: check your nozzle is hardened · Dry before printing
- ASA-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PA6-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PET-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
Printers a similar size to the Positron
Compare build volumes →
Tools for the Positron
All tools →The Positron questions
What is the build volume of the The Positron?
180 × 180 × 165 mm (width × depth × height), about 5.3 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the The Positron support?
Its slicer profile includes 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the The Positron?
Qidi X-Smart 3 (175 × 180 × 170 mm), Bambu Lab A1 mini (180 × 180 × 180 mm) and Prusa MINI (180 × 180 × 180 mm).
Did a part fit your Positron?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.