SecKit Seckit Go3 specs and build volume
The SecKit Seckit Go3 is a large printer with a 300 × 300 × 275 mm build volume (24.8 liters), larger than 53% of the 376 printers we track.
No store listing names the SecKit Seckit Go3 yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the SecKit Seckit Go3
Filament for the SecKit Seckit Go3
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PETG-CFStock setupAn enclosure helps · Dry before printing
- PLA-CFStock setupDry before printing
- ASA-CFStock setupAn enclosure helps · Dry before printing
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PA6-CFStock setupAn enclosure helps · Dry before printing
- PET-CFStock setupAn enclosure helps · Dry before printing
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
Printers a similar size to the Seckit Go3
Compare build volumes →
Tools for the Seckit Go3
All tools →SecKit Seckit Go3 questions
What is the build volume of the SecKit Seckit Go3?
300 × 300 × 275 mm (width × depth × height), about 24.8 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the SecKit Seckit Go3 support?
Its slicer profile includes 0.4 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the SecKit Seckit Go3?
Creality Ender-6 (250 × 250 × 400 mm), UltiMaker S5 (330 × 240 × 300 mm) and Creality Ender-3 S1 Plus (300 × 300 × 300 mm).
Did a part fit your Seckit Go3?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.