Mellow M1 specs and build volume
The Mellow M1 is a compact printer with a 106 × 106 × 100 mm build volume (1.1 liters), smaller than 100% of the 376 printers we track.
Its slicer profile lists profiles for 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles.
No store listing names the Mellow M1 yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the Mellow M1
Filament for the Mellow M1
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PLA-CFCheck firstAbrasive: check your nozzle is hardened · Dry before printing
- ASA-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PA6-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PET-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
Printers a similar size to the M1
Compare build volumes →
Tools for the M1
All tools →Mellow M1 questions
What is the build volume of the Mellow M1?
106 × 106 × 100 mm (width × depth × height), about 1.1 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Mellow M1 support?
Its slicer profile includes 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Mellow M1?
Geeetech M1 (105 × 105 × 95 mm), RolohaunDesign Rook MK1 LDO (110 × 110 × 111 mm) and RolohaunDesign Rolohaun Delta Flyer Refit (110 × 110 × 115 mm).
Did a part fit your M1?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.