LONGER LK10 Plus specs and build volume
The LONGER LK10 Plus is a large printer with a 320 × 320 × 400 mm build volume (41.0 liters), larger than 73% of the 376 printers we track.
Its slicer profile lists profiles for 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles.
No store listing names the LONGER LK10 Plus yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the LONGER LK10 Plus
Filament for the LONGER LK10 Plus
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PLA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- ASA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PA6-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PET-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
Printers a similar size to the LK10 Plus
Compare build volumes →
Tools for the LK10 Plus
All tools →LONGER LK10 Plus questions
What is the build volume of the LONGER LK10 Plus?
320 × 320 × 400 mm (width × depth × height), about 41.0 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the LONGER LK10 Plus support?
Its slicer profile includes 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the LONGER LK10 Plus?
Voron 2.4 (350 × 350 × 325 mm), Sovol SV08 (350 × 350 × 345 mm) and Anycubic Kobra S1 Max (350 × 350 × 350 mm).
Did a part fit your LK10 Plus?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.