Folgertech FT-6 specs and build volume
The Folgertech FT-6 is a extra-large printer with a 700 × 350 × 400 mm build volume (98.0 liters), larger than 88% of the 376 printers we track.
Its slicer profile lists profiles for 0.4 mm and 0.6 mm nozzles.
No store listing names the Folgertech FT-6 yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the Folgertech FT-6
Filament for the Folgertech FT-6
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PLA-CFCheck firstAbrasive: check your nozzle is hardened · Dry before printing
- ASA-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PA6-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PET-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
Printers a similar size to the FT-6
Compare build volumes →
Tools for the FT-6
All tools →Folgertech FT-6 questions
What is the build volume of the Folgertech FT-6?
700 × 350 × 400 mm (width × depth × height), about 98.0 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Folgertech FT-6 support?
Its slicer profile includes 0.4 mm and 0.6 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Folgertech FT-6?
Creality CR-10 Max (450 × 450 × 470 mm), Creality CR-M4 (450 × 450 × 470 mm) and innovatiQ TiQ8 (500 × 400 × 450 mm).
Did a part fit your FT-6?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.