BLOCKS RD50 V2 specs and build volume
The BLOCKS RD50 V2 is a extra-large printer with a 500 × 500 × 500 mm build volume (125.0 liters), larger than 89% of the 376 printers we track.
Its slicer profile lists profiles for 0.4 mm, 0.6 mm and 0.8 mm nozzles.
No store listing names the BLOCKS RD50 V2 yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the BLOCKS RD50 V2
Filament for the BLOCKS RD50 V2
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PLA-CFCheck firstAbrasive: check your nozzle is hardened · Dry before printing
- ASA-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PA6-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PET-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
Printers a similar size to the RD50 V2
Compare build volumes →
Tools for the RD50 V2
All tools →BLOCKS RD50 V2 questions
What is the build volume of the BLOCKS RD50 V2?
500 × 500 × 500 mm (width × depth × height), about 125.0 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the BLOCKS RD50 V2 support?
Its slicer profile includes 0.4 mm, 0.6 mm and 0.8 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the BLOCKS RD50 V2?
Comgrow T500 (500 × 500 × 500 mm), Sovol SV08 MAX (500 × 500 × 500 mm) and BLOCKS RF50 (500 × 500 × 500 mm).
Did a part fit your RD50 V2?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.