Zyltech PETG print temperature and settings
The settings Zyltech publishes for its PETG: 220–250 °C at the nozzle and 70–90 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Zyltech's recommended nozzle range is about 5°C cooler than the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 220–250 °C | |
|---|---|---|
| Bed | 70–90 °C | |
| Density | 1.27 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Zyltech sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 327 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
27 Zyltech PETG colors
- Army Green
- Black
- Black Texas Size Spool
- Bright Green
- Brown
- Brown Texas Size Spool
- Clear Texas Size Spool
- Deep Blue
- Deep Blue Texas Size Spool
- Gray
- Gray Texas Size Spool
- Green
- Gun Metal Silver Texas Size Spool
- Maroon
- Maroon Texas Size Spool
- Orange
- Orange Texas Size Spool
- Purple
- Purple Texas Size Spool
- Red
- Red Texas Size Spool
- Transparent
- Uncle Jessy's Gun Metal Silver
- White
- White Texas Size Spool
- Yellow
- Yellow Texas Size Spool
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Zyltech PETG at?
Zyltech lists 220–250°C at the nozzle and 70–90°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Zyltech PETG?
About 327 m at 1.75 mm, from its published density of 1.27 g/cm³.
How many colors does Zyltech PETG come in?
27 in the data we track, including Army Green, Black, Black Texas Size Spool and Bright Green.