QIDI Tech PETG print temperature and settings
The settings QIDI Tech publishes for its PETG: 240–280 °C at the nozzle and 70–80 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
QIDI Tech's recommended nozzle range is about 20°C hotter than the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 240–280 °C | |
|---|---|---|
| Bed | 70–80 °C | |
| Density | 1.24 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size QIDI Tech sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 335 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
7 QIDI Tech PETG colors
- PETG-Tough Black
- PETG-Tough Blue
- PETG-Tough Green
- PETG-Tough Orange
- PETG-Tough Red
- PETG-Tough White
- PETG-Tough Yellow
Frequently asked questions
What temperature should I print QIDI Tech PETG at?
QIDI Tech lists 240–280°C at the nozzle and 70–80°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of QIDI Tech PETG?
About 335 m at 1.75 mm, from its published density of 1.24 g/cm³.
How many colors does QIDI Tech PETG come in?
7 in the data we track, including PETG-Tough Black, PETG-Tough Blue, PETG-Tough Green and PETG-Tough Orange.