ELEGOO PETG print temperature and settings
The settings ELEGOO publishes for its PETG: 235–245 °C at the nozzle and 75–80 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
ELEGOO's recommended nozzle range is right in line with the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 235–245 °C | |
|---|---|---|
| Bed | 75–80 °C | |
| Density | 1.29 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size ELEGOO sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 322 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
24 ELEGOO PETG colors
- PETG PRO Black
- PETG PRO Blue
- PETG PRO Burgundy Red
- PETG PRO Green
- PETG PRO Grey
- PETG PRO Light Blue
- PETG PRO Olive Green
- PETG PRO Pink
- PETG PRO Purple
- PETG PRO Red
- PETG PRO Silver
- PETG PRO White
- PETG PRO Yellow
- RAPID PETG Beige
- RAPID PETG Black
- RAPID PETG Blue
- RAPID PETG Brown
- RAPID PETG Green
- RAPID PETG Grey
- RAPID PETG Orange
- RAPID PETG Red
- RAPID PETG Transparent
- RAPID PETG White
- RAPID PETG Yellow
Frequently asked questions
What temperature should I print ELEGOO PETG at?
ELEGOO lists 235–245°C at the nozzle and 75–80°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of ELEGOO PETG?
About 322 m at 1.75 mm, from its published density of 1.29 g/cm³.
How many colors does ELEGOO PETG come in?
24 in the data we track, including PETG PRO Black, PETG PRO Blue, PETG PRO Burgundy Red and PETG PRO Green.