ANYCUBIC PETG print temperature and settings
The settings ANYCUBIC publishes for its PETG: 240 °C at the nozzle and 70 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
ANYCUBIC's recommended nozzle range is right in line with the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 240 °C | |
|---|---|---|
| Bed | 70 °C | |
| Density | 1.3 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size ANYCUBIC sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 320 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
9 ANYCUBIC PETG colors
- Black
- Blue
- Clear
- Green
- Grey
- Orange
- Purple
- White
- Yellow
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print ANYCUBIC PETG at?
ANYCUBIC lists 240–240°C at the nozzle and 70–70°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of ANYCUBIC PETG?
About 320 m at 1.75 mm, from its published density of 1.3 g/cm³.
How many colors does ANYCUBIC PETG come in?
9 in the data we track, including Black, Blue, Clear and Green.