RatRig PETG print temperature and settings
The settings RatRig publishes for its PETG: 235 °C at the nozzle and 80 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
RatRig's recommended nozzle range is about 5°C cooler than the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 235 °C | |
|---|---|---|
| Bed | 80 °C | |
| Density | 1.27 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size RatRig sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 327 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
4 RatRig PETG colors
- Punkfil Balls Blue
- Punkfil Brute Black
- Punkfil Gooey Green
- Punkfil Screaming Steel
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print RatRig PETG at?
RatRig lists 235–235°C at the nozzle and 80–80°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of RatRig PETG?
About 327 m at 1.75 mm, from its published density of 1.27 g/cm³.
How many colors does RatRig PETG come in?
4 in the data we track, including Punkfil Balls Blue, Punkfil Brute Black, Punkfil Gooey Green and Punkfil Screaming Steel.