Printed Solid PETG print temperature and settings
The settings Printed Solid publishes for its PETG: 240 °C at the nozzle and 80 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Printed Solid's recommended nozzle range is right in line with the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 240 °C | |
|---|---|---|
| Bed | 80 °C | |
| Density | 1.27 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Printed Solid sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 327 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
12 Printed Solid PETG colors
- Jessie Black PETG
- Jessie Bold Blue PETG
- Jessie Clear PETG
- Jessie Gun Metal Grey PETG
- Jessie Mystery Orange PETG
- Jessie Neon Yellow PETG
- Jessie PS Red PETG
- Jessie Pure Cyan PETG
- Jessie Soul Black Glitter PETG
- Jessie Tree Green PETG
- Jessie White PETG
- Jessie Yellow Bird PETG
Frequently asked questions
What temperature should I print Printed Solid PETG at?
Printed Solid lists 240–240°C at the nozzle and 80–80°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Printed Solid PETG?
About 327 m at 1.75 mm, from its published density of 1.27 g/cm³.
How many colors does Printed Solid PETG come in?
12 in the data we track, including Jessie Black PETG, Jessie Bold Blue PETG, Jessie Clear PETG and Jessie Gun Metal Grey PETG.