Prusament PETG print temperature and settings
The settings Prusament publishes for its PETG: 240–260 °C at the nozzle and 70–90 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Prusament's recommended nozzle range is about 10°C hotter than the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 240–260 °C | |
|---|---|---|
| Bed | 70–90 °C | |
| Density | 1.27 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Prusament sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 327 m |
| 2 kg | ≈ 655 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
19 Prusament PETG colors
- Anthracite Grey
- Carmine Red
- Chalky Blue
- Clear
- Galaxy Black
- Jet Black
- Jungle Green
- Lipstick Red
- Mango Yellow
- Matte Black
- Neon Green Transparent
- Ocean Blue
- Pistachio Green
- Prusa Orange
- Signal White
- Terracotta Light
- Ultramarine Blue
- Urban Grey
- Yellow Gold
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Prusament PETG at?
Prusament lists 240–260°C at the nozzle and 70–90°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Prusament PETG?
About 327 m at 1.75 mm, from its published density of 1.27 g/cm³.
How many colors does Prusament PETG come in?
19 in the data we track, including Anthracite Grey, Carmine Red, Chalky Blue and Clear.