eSun PETG print temperature and settings
The settings eSun publishes for its PETG: 240 °C at the nozzle and 80 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
eSun's recommended nozzle range is right in line with the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 240 °C | |
|---|---|---|
| Bed | 80 °C | |
| Density | 1.27 g/cm³ | |
| Diameters | 1.75 mm, 2.85 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size eSun sells.
| Spool | 1.75 mm | 2.85 mm |
|---|---|---|
| 1 kg | ≈ 327 m | ≈ 123 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
20 eSun PETG colors
- Blue
- Fire Engine Red
- Green
- Grey
- Magenta
- Natural
- Orange
- Purple
- Solid Black
- Solid Blue
- Solid Gold
- Solid Green
- Solid Grey
- Solid Orange
- Solid Purple
- Solid Red
- Solid Silver
- Solid White
- Solid Yellow
- Yellow
Frequently asked questions
What temperature should I print eSun PETG at?
eSun lists 240–240°C at the nozzle and 80–80°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of eSun PETG?
About 327 m at 1.75 mm, from its published density of 1.27 g/cm³.
How many colors does eSun PETG come in?
20 in the data we track, including Blue, Fire Engine Red, Green and Grey.