Tinmorry PETG print temperature and settings
The settings Tinmorry publishes for its PETG: 220–250 °C at the nozzle and 70–90 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Tinmorry's recommended nozzle range is about 5°C cooler than the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 220–250 °C | |
|---|---|---|
| Bed | 70–90 °C | |
| Density | 1.27 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Tinmorry sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 327 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
57 Tinmorry PETG colors
- Galaxy Fuchsia
- Galaxy Gemstone Green
- Galaxy Green Gold
- Galaxy Jewel Blue
- Galaxy Purple Gold
- Glow Green
- Marble Granite
- Marble Light Brown
- Marble Light Grey
- Marble Magic Blue
- Marble Magic Brown
- Marble Magic Green
- Marble Magic Pink
- Marble Magic Purple
- Marble White
- Metallic Blue
- Metallic Champagne Gold
- Metallic Chrome/Metal Silver
- Metallic Green
- Metallic Purple
- Metallic Rose Gold
- Metallic Space Grey
- Rapid-Eco Apricot
- Rapid-Eco Black
- Rapid-Eco Bright Yellow
- Rapid-Eco Carter Yellow
- Rapid-Eco Chameleon Blue/Purple
- Rapid-Eco Coffee
- Rapid-Eco Cold White
- Rapid-Eco Dark Green
- Rapid-Eco Dark Red
- Rapid-Eco Fluorescent Green
- Rapid-Eco Fluorescent Purple Red
- Rapid-Eco Fluorescent Rose Red
- Rapid-Eco Fluorescent Yellow
- Rapid-Eco Grey
- Rapid-Eco Ivory White
- Rapid-Eco Klein Blue
- Rapid-Eco Light Grey
- Rapid-Eco Meeple White
- Rapid-Eco Mint Green
- Rapid-Eco Olive Green
- Rapid-Eco Orange
- Rapid-Eco Pink
- Rapid-Eco Sakura Pink
- Rapid-Eco Skin
- Rapid-Eco Sky Blue
- Rapid-Eco Sparkly Black
- Rapid-Eco Sparkly Blue
- Rapid-Eco Sparkly Red
- Rapid-Eco Sparkly Silver
- Rapid-Eco Sparkly Violet
- Rapid-Eco Transparent
- Rapid-Eco Transparent Blue
- Rapid-Eco Transparent Green
- Rapid-Eco Transparent Red
- Rapid-Eco Vinca Blue
Frequently asked questions
What temperature should I print Tinmorry PETG at?
Tinmorry lists 220–250°C at the nozzle and 70–90°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Tinmorry PETG?
About 327 m at 1.75 mm, from its published density of 1.27 g/cm³.
How many colors does Tinmorry PETG come in?
57 in the data we track, including Galaxy Fuchsia, Galaxy Gemstone Green, Galaxy Green Gold and Galaxy Jewel Blue.