TEQStone PETG print temperature and settings
The settings TEQStone publishes for its PETG: 220–250 °C at the nozzle and 60–100 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
TEQStone's recommended nozzle range is about 5°C cooler than the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 220–250 °C | |
|---|---|---|
| Bed | 60–100 °C | |
| Density | 1.27 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size TEQStone sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 327 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
8 TEQStone PETG colors
- Black
- Blue
- Brown
- Green
- Pink
- Silver
- White
- Yellow
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print TEQStone PETG at?
TEQStone lists 220–250°C at the nozzle and 60–100°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of TEQStone PETG?
About 327 m at 1.75 mm, from its published density of 1.27 g/cm³.
How many colors does TEQStone PETG come in?
8 in the data we track, including Black, Blue, Brown and Green.