Sunlu PETG print temperature and settings
The settings Sunlu publishes for its PETG: 205–270 °C at the nozzle and 70–80 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Sunlu's recommended nozzle range is right in line with the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 205–270 °C | |
|---|---|---|
| Bed | 70–80 °C | |
| Density | 1.23 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Sunlu sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 338 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
31 Sunlu PETG colors
- Black
- Blue
- Chocolate
- Green
- Grey
- High Speed Matte PETG - Black
- High Speed Matte PETG - Blue
- High Speed Matte PETG - Green
- High Speed Matte PETG - Grey
- High Speed Matte PETG - Mint
- High Speed Matte PETG - Olive Green
- High Speed Matte PETG - Orange
- High Speed Matte PETG - Pink
- High Speed Matte PETG - Red
- High Speed Matte PETG - Sky Blue
- High Speed Matte PETG - White
- High Speed Matte PETG - Yellow
- Midnight
- Orange
- Purple
- Red
- Roasted Chestnut
- Transparent
- Transparent Blue
- Transparent Green
- Transparent Orange
- Transparent Purple
- Transparent Red
- Transparent Yellow
- White
- Yellow
Frequently asked questions
What temperature should I print Sunlu PETG at?
Sunlu lists 205–270°C at the nozzle and 70–80°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Sunlu PETG?
About 338 m at 1.75 mm, from its published density of 1.23 g/cm³.
How many colors does Sunlu PETG come in?
31 in the data we track, including Black, Blue, Chocolate and Green.