R3D PETG print temperature and settings
The settings R3D publishes for its PETG: 245–260 °C at the nozzle and 75–80 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
R3D's recommended nozzle range is about 13°C hotter than the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 245–260 °C | |
|---|---|---|
| Bed | 75–80 °C | |
| Density | 1.27 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size R3D sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 327 m |
| 3 kg | ≈ 982 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
31 R3D PETG colors
- Bambu Green
- Black
- Coffee Brown
- Dark Blue
- F Green
- Gliding
- Grape Purple
- Grey
- Lemon
- Light Blue
- Pine Green
- Pink
- Purple
- Red
- Royal Blue
- Sapphire
- Silver
- Skin
- Tangerine
- Translucent Black
- Translucent Blue
- Translucent Light Blue
- Translucent Orange
- Translucent Pink
- Translucent Purple
- Translucent Red
- Translucent Yellow
- Transparent
- Turquoise
- White
- Yellow
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print R3D PETG at?
R3D lists 245–260°C at the nozzle and 75–80°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of R3D PETG?
About 327 m at 1.75 mm, from its published density of 1.27 g/cm³.
How many colors does R3D PETG come in?
31 in the data we track, including Bambu Green, Black, Coffee Brown and Dark Blue.