Polar Filament PETG print temperature and settings
The settings Polar Filament publishes for its PETG: 230–250 °C at the nozzle and 55–65 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Polar Filament's recommended nozzle range is right in line with the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 230–250 °C | |
|---|---|---|
| Bed | 55–65 °C | |
| Density | 1.27 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Polar Filament sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 327 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
9 Polar Filament PETG colors
- Candy Red
- Classic Black
- Natural (Clear)
- Polar White
- Purplex
- Regulation Gray
- Royal Blue
- Sunshine Yellow
- Vivid Orange
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Polar Filament PETG at?
Polar Filament lists 230–250°C at the nozzle and 55–65°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Polar Filament PETG?
About 327 m at 1.75 mm, from its published density of 1.27 g/cm³.
How many colors does Polar Filament PETG come in?
9 in the data we track, including Candy Red, Classic Black, Natural (Clear) and Polar White.