Overture PETG print temperature and settings
The settings Overture publishes for its PETG: 230–250 °C at the nozzle and 80–90 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Overture's recommended nozzle range is right in line with the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 230–250 °C | |
|---|---|---|
| Bed | 80–90 °C | |
| Density | 1.25 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Overture sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 333 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
24 Overture PETG colors
- Army green
- Black
- Blue
- Brown
- Digital Blue
- Gold
- Grass Green
- Green
- Light Gray
- Magenta
- Orange
- Pink
- Purple
- Red
- Rock White
- Space Gray
- Sparkle Blue
- Starry Blue
- Transparent
- Transparent Blue
- Transparent Green
- Transparent Red
- White
- Yellow
Frequently asked questions
What temperature should I print Overture PETG at?
Overture lists 230–250°C at the nozzle and 80–90°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Overture PETG?
About 333 m at 1.75 mm, from its published density of 1.25 g/cm³.
How many colors does Overture PETG come in?
24 in the data we track, including Army green, Black, Blue and Brown.