Numakers PETG print temperature and settings
The settings Numakers publishes for its PETG: 230–250 °C at the nozzle and 80–90 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Numakers's recommended nozzle range is right in line with the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 230–250 °C | |
|---|---|---|
| Bed | 80–90 °C | |
| Density | 1.27 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Numakers sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 327 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
9 Numakers PETG colors
- Grass Green
- Lemon Yellow
- Light Grey
- Mauve Purple
- Nuclear Red
- Outrageous Orange
- Pitch Black
- Pure White
- Royal Blue
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Numakers PETG at?
Numakers lists 230–250°C at the nozzle and 80–90°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Numakers PETG?
About 327 m at 1.75 mm, from its published density of 1.27 g/cm³.
How many colors does Numakers PETG come in?
9 in the data we track, including Grass Green, Lemon Yellow, Light Grey and Mauve Purple.