GEEETECH PETG print temperature and settings
The settings GEEETECH publishes for its PETG: 220–240 °C at the nozzle and 80–90 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
GEEETECH's recommended nozzle range is about 10°C cooler than the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 220–240 °C | |
|---|---|---|
| Bed | 80–90 °C | |
| Density | 1.25 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size GEEETECH sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 333 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
16 GEEETECH PETG colors
- Apple
- Black
- Blue
- Brown
- Dark Gray
- Green
- Orange
- Pink
- Purple
- Red
- Silver
- Skin
- Transparent
- Water Blue
- White
- Yellow
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print GEEETECH PETG at?
GEEETECH lists 220–240°C at the nozzle and 80–90°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of GEEETECH PETG?
About 333 m at 1.75 mm, from its published density of 1.25 g/cm³.
How many colors does GEEETECH PETG come in?
16 in the data we track, including Apple, Black, Blue and Brown.