Formfutura PETG print temperature and settings
The settings Formfutura publishes for its PETG: 200–240 °C at the nozzle and 65–75 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Formfutura's recommended nozzle range is about 20°C cooler than the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 200–240 °C | |
|---|---|---|
| Bed | 65–75 °C | |
| Density | 1.23 g/cm³ | |
| Diameters | 1.75 mm, 2.85 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Formfutura sells.
| Spool | 1.75 mm | 2.85 mm |
|---|---|---|
| 250 g | ≈ 85 m | ≈ 32 m |
| 500 g | ≈ 169 m | ≈ 64 m |
| 750 g | ≈ 254 m | ≈ 96 m |
| 1 kg | ≈ 338 m | ≈ 127 m |
| 2.3 kg | ≈ 777 m | ≈ 293 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
11 Formfutura PETG colors
- ReForm - rPET Black
- ReForm - rPET Dark Blue
- ReForm - rPET Grey
- ReForm - rPET Light Blue
- ReForm - rPET Light Green
- ReForm - rPET Orange
- ReForm - rPET Red
- ReForm - rPET Silver
- ReForm - rPET Violet
- ReForm - rPET White
- ReForm - rPET Yellow
Frequently asked questions
What temperature should I print Formfutura PETG at?
Formfutura lists 200–240°C at the nozzle and 65–75°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Formfutura PETG?
About 338 m at 1.75 mm, from its published density of 1.23 g/cm³.
How many colors does Formfutura PETG come in?
11 in the data we track, including ReForm - rPET Black, ReForm - rPET Dark Blue, ReForm - rPET Grey and ReForm - rPET Light Blue.