Filament Unger PETG print temperature and settings
The settings Filament Unger publishes for its PETG: 230 °C at the nozzle and 80 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Filament Unger's recommended nozzle range is about 10°C cooler than the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 230 °C | |
|---|---|---|
| Bed | 80 °C | |
| Density | 1.29 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Filament Unger sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 322 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
22 Filament Unger PETG colors
- Anthrazitsilber
- Bronze
- Edelstahl
- Elfenbein
- Himmelblau
- Leuchtblau
- Leuchtgelb
- Leuchtgrün
- Leuchthellrot
- Limette
- Magenta
- Marmor
- Oliv
- Orange
- Perlgold
- Rapunzelsilber
- Signalgrau
- Signalweiß
- Tiefschwarz
- Ultramarinblau
- Verkehrsrot
- Wasserblau
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Filament Unger PETG at?
Filament Unger lists 230–230°C at the nozzle and 80–80°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Filament Unger PETG?
About 322 m at 1.75 mm, from its published density of 1.29 g/cm³.
How many colors does Filament Unger PETG come in?
22 in the data we track, including Anthrazitsilber, Bronze, Edelstahl and Elfenbein.