Extrudr PETG print temperature and settings
The settings Extrudr publishes for its PETG: 230–260 °C at the nozzle and 70–100 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Extrudr's recommended nozzle range is about 5°C hotter than the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 230–260 °C | |
|---|---|---|
| Bed | 70–100 °C | |
| Density | 1.3 g/cm³ | |
| Diameters | 1.75 mm, 2.85 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Extrudr sells.
| Spool | 1.75 mm | 2.85 mm |
|---|---|---|
| 800 g | ≈ 256 m | ≈ 96 m |
| 1 kg | ≈ 320 m | ≈ 121 m |
| 1.1 kg | ≈ 352 m | ≈ 133 m |
| 2.5 kg | ≈ 800 m | ≈ 301 m |
| 5 kg | ≈ 1599 m | ≈ 603 m |
| 10 kg | ≈ 3198 m | ≈ 1206 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
41 Extrudr PETG colors
- Anthracite
- Black
- Bronze
- Copper
- Emerald Green
- glowEx
- Gold
- Grey
- Hellfire Red
- Light Blue
- Magenta
- MATT - Anthracite
- MATT - Black
- MATT - Blue
- MATT - Military Green
- MATT - Red
- MATT - Transparent
- Metallic
- Military Green
- Navy Blue
- Neon Green
- Neon Orange
- Neon Red
- Neon Yellow
- Orange
- Purple
- Red
- Signal Green
- Silver
- Transparent
- Transparent Blue
- Transparent Green
- Transparent Orange
- Transparent Red
- Transparent Yellow
- Turquoise
- White
- X - Black REC
- X - Transparent REC
- X - White REC
- Yellow
Frequently asked questions
What temperature should I print Extrudr PETG at?
Extrudr lists 230–260°C at the nozzle and 70–100°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Extrudr PETG?
About 320 m at 1.75 mm, from its published density of 1.3 g/cm³.
How many colors does Extrudr PETG come in?
41 in the data we track, including Anthracite, Black, Bronze and Copper.