Das Filament PETG print temperature and settings
The settings Das Filament publishes for its PETG: 230 °C at the nozzle and 75 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Das Filament's recommended nozzle range is about 10°C cooler than the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 230 °C | |
|---|---|---|
| Bed | 75 °C | |
| Density | 1.29 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Das Filament sells.
| Spool | 1.75 mm |
|---|---|
| 800 g | ≈ 258 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
58 Das Filament PETG colors
- Alu-silber
- Alu-silber - Refill
- Anthrazit V2
- Anthrazit V2 - Refill
- Beige
- Beige - Refill
- Blau
- Blau - Refill
- Burnt Copper
- Burnt Copper - Refill
- Feuerrot
- Feuerrot - Refill
- Flammschutz Schwarz
- Flammschutz Schwarz - Refill
- Grasgrün
- Grasgrün - Refill
- Leuchtorange
- Leuchtorange - Refill
- Lila
- Lila - Refill
- Maisgelb
- Maisgelb - Refill
- Melonengelb
- Melonengelb - Refill
- Metallic Blau
- Metallic Blau - Refill
- Militär-Grün
- Militär-Grün - Refill
- Natur
- Natur - Refill
- Opalgrün
- Opalgrün - Refill
- Rubinrot
- Rubinrot - Refill
- Saphirblau
- Saphirblau - Refill
- Schiefergrau
- Schiefergrau - Refill
- Schwarz
- Schwarz - Refill
- Silber
- Silber - Refill
- Sturmgrau
- Sturmgrau - Refill
- Transl. Wassergrün
- Transl. Wassergrün - Refill
- Transluzent Neongelb
- Transluzent Neongelb - Refill
- Transluzent Neongrün
- Transluzent Neongrün - Refill
- Transparent Blau
- Transparent Blau - Refill
- Transparent Neongrün
- Transparent Neongrün - Refill
- Transparent Rot
- Transparent Rot - Refill
- Weiß
- Weiß - Refill
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Das Filament PETG at?
Das Filament lists 230–230°C at the nozzle and 75–75°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Das Filament PETG?
About 322 m at 1.75 mm, from its published density of 1.29 g/cm³.
How many colors does Das Filament PETG come in?
58 in the data we track, including Alu-silber, Alu-silber - Refill, Anthrazit V2 and Anthrazit V2 - Refill.