CR3D PETG print temperature and settings
The settings CR3D publishes for its PETG: 255 °C at the nozzle and 80 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
CR3D's recommended nozzle range is about 15°C hotter than the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 255 °C | |
|---|---|---|
| Bed | 80 °C | |
| Density | 1.24 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size CR3D sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 335 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
23 CR3D PETG colors
- PETG Anthrazitgrau
- PETG Black Magic
- PETG Blau
- PETG Blue Magic
- PETG Bronze
- PETG Carbon
- PETG Gelb
- PETG Green Magic
- PETG HevORT Green
- PETG Leuchtgrün
- PETG Neon Grün
- PETG Neonorange
- PETG Perlhellgrau
- PETG Pink
- PETG Red Magic
- PETG Reinorange
- PETG Rot
- PETG Schwarz
- PETG Seidenweiß
- PETG Signalweiss
- PETG Violett
- PETG Wasserblau
- PETG Wasserblau Magic
Frequently asked questions
What temperature should I print CR3D PETG at?
CR3D lists 255–255°C at the nozzle and 80–80°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of CR3D PETG?
About 335 m at 1.75 mm, from its published density of 1.24 g/cm³.
How many colors does CR3D PETG come in?
23 in the data we track, including PETG Anthrazitgrau, PETG Black Magic, PETG Blau and PETG Blue Magic.