Closin PETG print temperature and settings
The settings Closin publishes for its PETG: 220–260 °C at the nozzle and 85 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Closin's recommended nozzle range is right in line with the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 220–260 °C | |
|---|---|---|
| Bed | 85 °C | |
| Density | 1.27 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Closin sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 327 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
23 Closin PETG colors
- Amarelo
- Azul
- Branco
- Bronze
- Cinza
- Fluo Blue
- Fluo Green
- Fluo Red
- Fluo Rose
- Fluo Yellow
- Gold
- Laranja
- Lemon Green
- Marron
- Preto
- Rosa
- Roxo
- Silver Prateado
- Skin
- Transparente
- Verde
- Vermelho
- Wood
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Closin PETG at?
Closin lists 220–260°C at the nozzle and 85–85°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Closin PETG?
About 327 m at 1.75 mm, from its published density of 1.27 g/cm³.
How many colors does Closin PETG come in?
23 in the data we track, including Amarelo, Azul, Branco and Bronze.