AURAPOL PETG print temperature and settings
The settings AURAPOL publishes for its PETG: 245–255 °C at the nozzle and 85–95 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
AURAPOL's recommended nozzle range is about 10°C hotter than the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 245–255 °C | |
|---|---|---|
| Bed | 85–95 °C | |
| Density | 1.259 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size AURAPOL sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 330 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
8 AURAPOL PETG colors
- Graphite black
- Green Mint
- Natural transparent
- Signal blue
- Signal Grey
- Sulfur Yellow
- Traffic Red
- White
Frequently asked questions
What temperature should I print AURAPOL PETG at?
AURAPOL lists 245–255°C at the nozzle and 85–95°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of AURAPOL PETG?
About 330 m at 1.75 mm, from its published density of 1.259 g/cm³.
How many colors does AURAPOL PETG come in?
8 in the data we track, including Graphite black, Green Mint, Natural transparent and Signal blue.