add:north PETG print temperature and settings
The settings add:north publishes for its PETG: 245–260 °C at the nozzle and 70–80 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
add:north's recommended nozzle range is about 13°C hotter than the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 245–260 °C | |
|---|---|---|
| Bed | 70–80 °C | |
| Density | 1.3 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size add:north sells.
| Spool | 1.75 mm |
|---|---|
| 750 g | ≈ 240 m |
| 1 kg | ≈ 320 m |
| 2.3 kg | ≈ 736 m |
| 5 kg | ≈ 1599 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
23 add:north PETG colors
- ESD PETG - Black
- PETG - Black
- PETG - Clear
- PETG - Glitz Grey
- PETG - Green
- PETG - Grey
- PETG - Light Grey
- PETG - Lucent Orange
- PETG - Medium Blue
- PETG - Red
- PETG - White
- PETG - Yellow
- PETG Economy - Black
- PETG Economy - Light Grey
- PETG Economy - White
- PETG Flame Retardant V0 - Black
- PETG Flame Retardant V0 - Natural
- PETG Flame Retardant V0 - White
- PETG PRO Matte - Black
- PETG PRO Matte - White
- rPETG Matte - Black
- rPETG Matte - Grey
- rPETG Matte - White
Frequently asked questions
What temperature should I print add:north PETG at?
add:north lists 245–260°C at the nozzle and 70–80°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of add:north PETG?
About 320 m at 1.75 mm, from its published density of 1.3 g/cm³.
How many colors does add:north PETG come in?
23 in the data we track, including ESD PETG - Black, PETG - Black, PETG - Clear and PETG - Glitz Grey.