3DJAKE PETG print temperature and settings
The settings 3DJAKE publishes for its PETG: 240 °C at the nozzle and 90 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
3DJAKE's recommended nozzle range is right in line with the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 240 °C | |
|---|---|---|
| Bed | 90 °C | |
| Density | 1.24 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size 3DJAKE sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 335 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
18 3DJAKE PETG colors
- Black
- Blue Transparent
- Bronze
- Dark Blue
- Dark Gray
- Green Transparent
- Light Green
- Neon Orange
- Neon Yellow
- Pastel blue
- Pastell pink
- Red
- Red Transparent
- Silver
- Sky Blue
- Transparent
- White
- Yellow Transparent
Frequently asked questions
What temperature should I print 3DJAKE PETG at?
3DJAKE lists 240–240°C at the nozzle and 90–90°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of 3DJAKE PETG?
About 335 m at 1.75 mm, from its published density of 1.24 g/cm³.
How many colors does 3DJAKE PETG come in?
18 in the data we track, including Black, Blue Transparent, Bronze and Dark Blue.