3DXTECH PETG print temperature and settings
The settings 3DXTECH publishes for its PETG: 245 °C at the nozzle and 80 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
3DXTECH's recommended nozzle range is about 5°C hotter than the typical PETG across the 45 PETG lines we track (median 230–250°C).
Print settings
| Nozzle | 245 °C | |
|---|---|---|
| Bed | 80 °C | |
| Density | 1.34 g/cm³ | |
| Diameters | 1.75 mm, 2.85 mm | |
Bars run on a fixed scale; the dashed line is the median of the 45 PETG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size 3DXTECH sells.
| Spool | 1.75 mm | 2.85 mm |
|---|---|---|
| 750 g | ≈ 233 m | ≈ 88 m |
| 2 kg | ≈ 621 m | ≈ 234 m |
Printing PETG
Full PETG guide →Tougher and more heat-resistant than PLA, with little warping, which makes it the usual step up for functional parts.
1 3DXTECH PETG colors
- CarbonX™ Carbon Fiber Black
Frequently asked questions
What temperature should I print 3DXTECH PETG at?
3DXTECH lists 245–245°C at the nozzle and 80–80°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of 3DXTECH PETG?
About 310 m at 1.75 mm, from its published density of 1.34 g/cm³.
How many colors does 3DXTECH PETG come in?
1 in the data we track, including CarbonX™ Carbon Fiber Black.