ZIRO 3D PLA print temperature and settings
The settings ZIRO 3D publishes for its PLA: 190–220 °C at the nozzle and 50–60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
ZIRO 3D's recommended nozzle range is about 10°C cooler than the typical PLA across the 54 PLA lines we track (median 210–220°C).
Print settings
| Nozzle | 190–220 °C | |
|---|---|---|
| Bed | 50–60 °C | |
| Density | 1.24 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 54 PLA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size ZIRO 3D sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 335 m |
Printing PLA
Full PLA guide →The easiest filament to print: low warping, little smell, crisp detail, and the default for most hobby printing.
8 ZIRO 3D PLA colors
- Fluorescence Fluo Blue
- Fluorescence Fluo Green
- Fluorescence Fluo Orange
- Fluorescence Fluo Pink
- Fluorescence Fluo Purple
- Fluorescence Fluo Red
- Fluorescence Fluo Yellow
- Gradiant Matte Rainbow Blaze
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print ZIRO 3D PLA at?
ZIRO 3D lists 190–220°C at the nozzle and 50–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of ZIRO 3D PLA?
About 335 m at 1.75 mm, from its published density of 1.24 g/cm³.
How many colors does ZIRO 3D PLA come in?
8 in the data we track, including Fluorescence Fluo Blue, Fluorescence Fluo Green, Fluorescence Fluo Orange and Fluorescence Fluo Pink.