ANYCUBIC PLA print temperature and settings
The settings ANYCUBIC publishes for its PLA: 210 °C at the nozzle and 55–60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
ANYCUBIC's recommended nozzle range is about 5°C cooler than the typical PLA across the 54 PLA lines we track (median 210–220°C).
Print settings
| Nozzle | 210 °C | |
|---|---|---|
| Bed | 55–60 °C | |
| Density | 1.24 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 54 PLA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size ANYCUBIC sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 335 m |
Printing PLA
Full PLA guide →The easiest filament to print: low warping, little smell, crisp detail, and the default for most hobby printing.
48 ANYCUBIC PLA colors
- Basic Beige
- Basic Black
- Basic Blue (Navy Blue)
- Basic Bronze
- Basic Brown
- Basic Clear
- Basic Cyan
- Basic Dark Brown
- Basic Green
- Basic Green Flash
- Basic Grey
- Basic Magenta
- Basic Orange
- Basic Pink
- Basic Purple
- Basic Red
- Basic Texture Grey
- Basic Texture Silver
- Basic White
- Basic Yellow
- Black
- Glow Blue
- Glow Green
- Glow Yellow
- High Speed Black
- High Speed Blue
- High Speed Green
- High Speed Grey
- High Speed Orange
- High Speed Red
- High Speed White
- Matte Black
- Matte Blue
- Matte Green
- Matte Green-Brown
- Matte Grey
- Matte Ice Blue
- Matte Orange
- Matte Purple
- Matte Red
- Matte Red-Blue
- Matte Sakura Pink
- Matte White
- Matte Yellow
- Metal Black
- Metal Blue
- Metal Champagne
- Metal Copper
Frequently asked questions
What temperature should I print ANYCUBIC PLA at?
ANYCUBIC lists 210–210°C at the nozzle and 55–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of ANYCUBIC PLA?
About 335 m at 1.75 mm, from its published density of 1.24 g/cm³.
How many colors does ANYCUBIC PLA come in?
48 in the data we track, including Basic Beige, Basic Black, Basic Blue (Navy Blue) and Basic Bronze.