Eryone PLA print temperature and settings
The settings Eryone publishes for its PLA: 210–220 °C at the nozzle and 50–60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Eryone's recommended nozzle range is right in line with the typical PLA across the 54 PLA lines we track (median 210–220°C).
Print settings
| Nozzle | 210–220 °C | |
|---|---|---|
| Bed | 50–60 °C | |
| Density | 1.24 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 54 PLA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Eryone sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 335 m |
Printing PLA
Full PLA guide →The easiest filament to print: low warping, little smell, crisp detail, and the default for most hobby printing.
8 Eryone PLA colors
- Black
- Dusty Blue & Mustard Yellow
- Pink & Blue
- Silk Black & Gold & Purple
- Silk Black & Rose Red
- Silk Copper
- Silk Gold
- White
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Eryone PLA at?
Eryone lists 210–220°C at the nozzle and 50–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Eryone PLA?
About 335 m at 1.75 mm, from its published density of 1.24 g/cm³.
How many colors does Eryone PLA come in?
8 in the data we track, including Black, Dusty Blue & Mustard Yellow, Pink & Blue and Silk Black & Gold & Purple.