Fusion PLA print temperature and settings
The settings Fusion publishes for its PLA: 220 °C at the nozzle and 50–60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Fusion's recommended nozzle range is about 5°C hotter than the typical PLA across the 54 PLA lines we track (median 210–220°C).
Print settings
| Nozzle | 220 °C | |
|---|---|---|
| Bed | 50–60 °C | |
| Density | 1.24 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 54 PLA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Fusion sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 335 m |
Printing PLA
Full PLA guide →The easiest filament to print: low warping, little smell, crisp detail, and the default for most hobby printing.
17 Fusion PLA colors
- Black
- Blue
- Breakfast Blue
- Bubblegum
- Green
- Hyper Orange
- Moondust
- Mystery
- Pickle Juice
- Purple
- Quantum Blue
- Red
- Sublime
- Tangerine Dream
- Violet Surge
- White
- Yellow-Gold
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Fusion PLA at?
Fusion lists 220–220°C at the nozzle and 50–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Fusion PLA?
About 335 m at 1.75 mm, from its published density of 1.24 g/cm³.
How many colors does Fusion PLA come in?
17 in the data we track, including Black, Blue, Breakfast Blue and Bubblegum.