JAYO PLA print temperature and settings
The settings JAYO publishes for its PLA: 210 °C at the nozzle and 60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
JAYO's recommended nozzle range is about 5°C cooler than the typical PLA across the 54 PLA lines we track (median 210–220°C).
Print settings
| Nozzle | 210 °C | |
|---|---|---|
| Bed | 60 °C | |
| Density | 1.24 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 54 PLA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size JAYO sells.
| Spool | 1.75 mm |
|---|---|
| 1.1 kg | ≈ 369 m |
Printing PLA
Full PLA guide →The easiest filament to print: low warping, little smell, crisp detail, and the default for most hobby printing.
9 JAYO PLA colors
- Matte Black
- Matte Pink
- Matte Purple
- Matte White
- Olive green
- Red (Glow Orange)
- White (Glow Blue)
- White (Glow Green)
- Yellow (Glow Yellow)
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print JAYO PLA at?
JAYO lists 210–210°C at the nozzle and 60–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of JAYO PLA?
About 335 m at 1.75 mm, from its published density of 1.24 g/cm³.
How many colors does JAYO PLA come in?
9 in the data we track, including Matte Black, Matte Pink, Matte Purple and Matte White.