TEQStone PLA print temperature and settings
The settings TEQStone publishes for its PLA: 190–225 °C at the nozzle and 60 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
TEQStone's recommended nozzle range is about 7°C cooler than the typical PLA across the 54 PLA lines we track (median 210–220°C).
Print settings
| Nozzle | 190–225 °C | |
|---|---|---|
| Bed | 60 °C | |
| Density | 1.24 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 54 PLA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size TEQStone sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 335 m |
Printing PLA
Full PLA guide →The easiest filament to print: low warping, little smell, crisp detail, and the default for most hobby printing.
25 TEQStone PLA colors
- Black
- Blue
- Brown
- Glow Blue
- Glow Green
- Glow Orange
- Green
- Grey
- Marble Blue
- Marble Brown
- Marble Grey
- Orange
- Pink
- Red
- Silk Bronze
- Silk Copper
- Silk Dual Gold Silver
- Silk Gold
- Silk Rainbow
- Silk Royal Blue
- Silk Tri Red Blue Green
- Silk White
- Silver
- White
- Yellow
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print TEQStone PLA at?
TEQStone lists 190–225°C at the nozzle and 60–60°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of TEQStone PLA?
About 335 m at 1.75 mm, from its published density of 1.24 g/cm³.
How many colors does TEQStone PLA come in?
25 in the data we track, including Black, Blue, Brown and Glow Blue.