TECBEARS PLA print temperature and settings
The settings TECBEARS publishes for its PLA: 190–230 °C at the nozzle and 50–70 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
TECBEARS's recommended nozzle range is about 5°C cooler than the typical PLA across the 54 PLA lines we track (median 210–220°C).
Print settings
| Nozzle | 190–230 °C | |
|---|---|---|
| Bed | 50–70 °C | |
| Density | 1.25 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 54 PLA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size TECBEARS sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 333 m |
| 1.1 kg | ≈ 366 m |
Printing PLA
Full PLA guide →The easiest filament to print: low warping, little smell, crisp detail, and the default for most hobby printing.
32 TECBEARS PLA colors
- Beige
- Black
- Blue
- Cherry Wood
- Cyan
- Glow Blue
- Glow Green
- Glow White to Glow Blue
- Glow White to Glow Green
- Glow Yellow
- Green
- Grey
- Maple Wood
- Olive Green
- Orange
- Pink
- Plus High Speed Grey
- Plus High Speed Olive Green
- Plus High Speed Orange
- Purple
- Red
- Silk Gold
- Silk Silver
- Transparent Blue
- Transparent Green
- Transparent Orange
- Transparent Purple
- Transparent Red
- Transparent Yellow
- Walnut Wood
- White
- Wood
Frequently asked questions
What temperature should I print TECBEARS PLA at?
TECBEARS lists 190–230°C at the nozzle and 50–70°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of TECBEARS PLA?
About 333 m at 1.75 mm, from its published density of 1.25 g/cm³.
How many colors does TECBEARS PLA come in?
32 in the data we track, including Beige, Black, Blue and Cherry Wood.