Sunlu ASA print temperature and settings
The settings Sunlu publishes for its ASA: 250–280 °C at the nozzle and 80–100 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Sunlu's recommended nozzle range is about 10°C hotter than the typical ASA across the 27 ASA lines we track (median 250–260°C).
Print settings
| Nozzle | 250–280 °C | |
|---|---|---|
| Bed | 80–100 °C | |
| Density | 1.04 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 27 ASA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Sunlu sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 400 m |
Printing ASA
Full ASA guide →Similar to ABS in strength and heat resistance but resistant to UV, so it is the usual choice for parts that live outdoors.
10 Sunlu ASA colors
- Black
- Blue (Klein Blue)
- Green
- Grey
- Lavender Purple
- Mocha Mousse
- Natural
- Red
- White
- Yellow
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Sunlu ASA at?
Sunlu lists 250–280°C at the nozzle and 80–100°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Sunlu ASA?
About 400 m at 1.75 mm, from its published density of 1.04 g/cm³.
How many colors does Sunlu ASA come in?
10 in the data we track, including Black, Blue (Klein Blue), Green and Grey.