QIDI Tech ASA print temperature and settings
The settings QIDI Tech publishes for its ASA: 240–280 °C at the nozzle and 100–110 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
QIDI Tech's recommended nozzle range is about 5°C hotter than the typical ASA across the 27 ASA lines we track (median 250–260°C).
Print settings
| Nozzle | 240–280 °C | |
|---|---|---|
| Bed | 100–110 °C | |
| Density | 1.07 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 27 ASA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size QIDI Tech sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 389 m |
Printing ASA
Full ASA guide →Similar to ABS in strength and heat resistance but resistant to UV, so it is the usual choice for parts that live outdoors.
8 QIDI Tech ASA colors
- Black
- Blue
- Brown
- Gray
- Green
- Red
- White
- Yellow
Frequently asked questions
What temperature should I print QIDI Tech ASA at?
QIDI Tech lists 240–280°C at the nozzle and 100–110°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of QIDI Tech ASA?
About 389 m at 1.75 mm, from its published density of 1.07 g/cm³.
How many colors does QIDI Tech ASA come in?
8 in the data we track, including Black, Blue, Brown and Gray.