Prusament ASA print temperature and settings
The settings Prusament publishes for its ASA: 250–270 °C at the nozzle and 105–115 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Prusament's recommended nozzle range is about 5°C hotter than the typical ASA across the 27 ASA lines we track (median 250–260°C).
Print settings
| Nozzle | 250–270 °C | |
|---|---|---|
| Bed | 105–115 °C | |
| Density | 1.07 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 27 ASA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Prusament sells.
| Spool | 1.75 mm |
|---|---|
| 800 g | ≈ 311 m |
Printing ASA
Full ASA guide →Similar to ABS in strength and heat resistance but resistant to UV, so it is the usual choice for parts that live outdoors.
18 Prusament ASA colors
- Galaxy Black
- Galaxy Black (NFC)
- Jet Black
- Jet Black (NFC)
- Lipstick Red
- Lipstick Red (NFC)
- Natural
- Natural (NFC)
- Olive Green
- Olive Green (NFC)
- Prusa Orange
- Prusa Orange (NFC)
- Prusa Pro Green
- Prusa Pro Green (NFC)
- Sapphire Blue
- Sapphire Blue (NFC)
- Signal White
- Signal White (NFC)
Frequently asked questions
What temperature should I print Prusament ASA at?
Prusament lists 250–270°C at the nozzle and 105–115°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Prusament ASA?
About 389 m at 1.75 mm, from its published density of 1.07 g/cm³.
How many colors does Prusament ASA come in?
18 in the data we track, including Galaxy Black, Galaxy Black (NFC), Jet Black and Jet Black (NFC).