3DXTECH ASA print temperature and settings
The settings 3DXTECH publishes for its ASA: 245 °C at the nozzle and 100 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
3DXTECH's recommended nozzle range is about 10°C cooler than the typical ASA across the 27 ASA lines we track (median 250–260°C).
Print settings
| Nozzle | 245 °C | |
|---|---|---|
| Bed | 100 °C | |
| Density | 1.07 g/cm³ | |
| Diameters | 1.75 mm, 2.85 mm | |
Bars run on a fixed scale; the dashed line is the median of the 27 ASA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size 3DXTECH sells.
| Spool | 1.75 mm | 2.85 mm |
|---|---|---|
| 750 g | ≈ 291 m | ≈ 110 m |
| 1 kg | ≈ 389 m | ≈ 146 m |
| 2 kg | ≈ 777 m | ≈ 293 m |
| 4 kg | ≈ 1554 m | ≈ 586 m |
Printing ASA
Full ASA guide →Similar to ABS in strength and heat resistance but resistant to UV, so it is the usual choice for parts that live outdoors.
12 3DXTECH ASA colors
- 3DXMAX™ Black
- 3DXMAX™ Dark Grey
- 3DXMAX™ Flat Dark Earth
- 3DXMAX™ Green
- 3DXMAX™ Light Grey
- 3DXMAX™ Natural
- 3DXMAX™ Orange
- 3DXMAX™ Red
- 3DXMAX™ Reflex Blue
- 3DXMAX™ White
- 3DXMAX™ Yellow
- CarbonX™ Carbon Fiber Black
Frequently asked questions
What temperature should I print 3DXTECH ASA at?
3DXTECH lists 245–245°C at the nozzle and 100–100°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of 3DXTECH ASA?
About 389 m at 1.75 mm, from its published density of 1.07 g/cm³.
How many colors does 3DXTECH ASA come in?
12 in the data we track, including 3DXMAX™ Black, 3DXMAX™ Dark Grey, 3DXMAX™ Flat Dark Earth and 3DXMAX™ Green.